Numerical Analysis of the Ability of a Floating Vehicle to Overcome a Water Obstacle
AbstractThe paper presents the results of simulation tests of the entry of a floating transporter to a water obstacle. The simulation tests were performed with the use of LS Dyna program, based on the finite element method (FEM). The computational model was developed and used in the simulation of the manoeuvre of entering the water obstacle for the extreme conditions, which are described by NATO standards. For a model, as an example vehicle, the floating transporter PTS-M was used. The results of the application of the elaborated model confirmed the possibility to utilise the method to verify the behaviour of a vehicle in a very important and difficult problem from the point of view of vehicle safety conditions.
Sinking and Loss of Life - Amphibious Passenger Vehicle Lady Duck, Ottawa River Near the Hull Marina, Gatineau, Québec, 23 June 2002: Maritime Investigation Report [online]. Ottawa: Transportation Safety Board of Canada, 2004 [viewed 2021-03-20]. ISBN 0-662-36854-1. Available from: http://publications.gc.ca/site/eng/9.686962/publication.html
NATO - STANAG 4357:1991, Allied Vehicle Testing Publications (AVTPs).
NO-23-A504:2017, Military Vehicles - Research on the Ability to Overcome Ter-rain Obstacles (in Polish).
NATO - STANAG 2805:1997, Fording and Flotation Requirements for Combat and Support Ground Vehicles.
KRZYSZTOFIAK G. Aeromechanic Dimensionless Quantities in the Wind Tunnel Tests of the Rotors of the Rotary-Wing Aircraft Models (in Polish) [online]. Modelowanie Inżynierskie 42, 2011, pp. 217-226 [viewed 2021-03-20]. ISSN 1896-771X. Available from: http://www.kms.polsl.pl/mi/pelne_11/26.pdf
WALENTYNOWICZ J., J. MATRACKI, S. WRZESIE and M. FRANT. Experi-mental-Numerical Research of Swimming of Wheeled Armored Vehicle (in Polish) [online]. Biuletyn WAT, 2006, (55)3, pp. 7-21 [viewed 2021-03-20]. Available from: http://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-article-BWA1-0013-0048
KURTOGLU I. Hydrodynamic Drag Force Predictions for Amphibious Military Vehicles [online]. In: Proceedings of the 11th European LS-DYNA Conference, 2017. Salzburg: DYNAmore GmbH [viewed 2021-03-20]. Available from: https://www.dynalook.com/conferences/11th-european-ls-dyna-conference/icfd-solver-and-fsi/hydrodynamic-drag-force-predictions-for-amphibious-military-vehicles
KOTOWSKI M., W. BARNAT, M. GRYGOROWICZ, R. PANOWICZ and P. DYBCIO. Experimental and Numerical Buoyancy Analysis of Tracked Military Vehicle. Journal of KONES Powertrain and Transport, 2012, (19)4, pp. 321-324. ISSN 1231-4005.
PAWLAK M., M. SLAWSKI and S. DUDA. Numerical Model of Tracked Vehicle Crossing Inland Water. MATEC Web of Conferences, 2019, 285, 00014. DOI 10.1051/matecconf/201928500014.
PTS Floating Tracked Transporter. Description and Exploitation (in Polish). War-saw: MON. Boss. Wojsk Eng., 1971. 261/69.
WANG J. and H. CHEN. Fluid Structure Interaction for Immersed Bodies [online]. In: Proceedings of the 6th European LS-DYNA Users’ Conference. Gothenburg: DYNAmore GmbH, 2007, pp. 4.3-4.8 [viewed 2021-03-20]. Available from: https://www.dynalook.com/conferences/european-conf-2007/fluid-structure-interaction-for-immersed-bodies.pdf
How to Cite
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Users can use, reuse and build upon the material published in the journal for any purpose, even commercially.